Are your Leak Detection services available in San Antonio?

Yes, Masters Plumbing Service provides round-the-clock Leak Detection services directly in San Antonio, TX.

How much does emergency service cost in San Antonio?

We offer upfront, transparent pricing with no hidden fees for all service calls in San Antonio.

🎙️ Find It Before You Open a Wall

Leak Detection in San Antonio, TX — No Guesswork, No Unnecessary Demo

Name: Masters Plumbing Service
Telephone: +1-844-833-0201
Price range: $$

A water bill that jumped 30% with no change in usage. A ceiling stain that keeps reappearing after painting. A soft spot in flooring with no visible source. These are signs of a hidden leak that's been running long enough to cause structural damage — and every day it runs is money lost and damage accumulating. Masters Plumbing Service uses acoustic ground microphones, thermal imaging cameras, and precision pressure decay testing to locate leaks in San Antonio homes without speculative demolition.

📞 Find My Leak — Call +1-844-833-0201

Acoustic Ground MicrophonesThermal Infrared CamerasPressure Decay TestingSlab & Wall Leak Specialists

Our Detection Methods

01
Acoustic MicrophonePressurized leaks create a detectable sound — amplified to locate the failure within inches
02
Thermal Infrared CameraActive leaks create temperature differentials on surfaces — we map the wet zone without cutting
03
Pressure Decay TestingConfirms active water loss and zones the failing branch before detection equipment deploys
04
Tracer Gas DetectionFor very slow leaks where acoustic methods aren't conclusive — sensitive to parts per million
05
Written Report for InsuranceFormatted for insurance submission — pressure test results and thermal imagery included

Licensed Leak Detection service in San Antonio, TX - Masters Plumbing Service

Why Detection First

How Masters Plumbing Service Finds Hidden Leaks Without Guessing

A pressure test tells us a leak exists. Detection equipment tells us precisely where.

🎙️

Acoustic Ground Microphone

Most effective on metal pipe under slab or in concrete — materials that conduct sound efficiently. We establish a clean acoustic baseline by briefly shutting off the house before scanning.

🌡️

Thermal Infrared Camera

Particularly effective inside insulated wall cavities and for finding the extent of moisture spread beyond the immediate leak point — telling us not just where the pipe is failing but how far the moisture has already traveled.

📉

Pressure Decay Testing

We isolate the supply system, pressurize to operating pressure, and monitor over a timed hold period. Any pressure drop confirms active water loss from the supply side. By isolating zones — hot side vs. cold side, section by section — we narrow down which branch is leaking before deploying detection equipment.

💨

Tracer Gas Detection

For leaks that don't produce sufficient acoustic signature — very slow leaks, polyethylene pipe, or leaks deep under concrete — we introduce a nitrogen/hydrogen tracer gas mixture into the isolated pipe and use a calibrated gas detector at the surface to find where the gas escapes. Sensitive to concentrations far below what produces an audible acoustic signal.

What We Locate

Hidden Leak Types We Find and Document in San Antonio

Hidden leaks occur in different locations throughout a property — each requiring a slightly different detection approach. Here's how we handle the most common scenarios in San Antonio, TX.

Under Slab

Slab Leak Detection in San Antonio, TX

Supply lines running under or through the concrete slab fail from corrosion, shifting, or manufacturing defects — and the leak is invisible from the surface but audible to acoustic equipment. We walk the floor on a grid pattern, map the loudest detection points, and triangulate to a specific floor location, typically within a square foot. Confirmed slab leak location is documented with marked coordinates for the repair crew.

Professional Leak Detection technician working in San Antonio, TX

In-Wall

In-Wall & Ceiling Leak Detection

We document the thermal anomaly, mark the approximate pipe location, and recommend a minimal access cut rather than a wide wall opening — typically saving hundreds in drywall repair costs.

Water Main

Main Line Leak Location in San Antonio

Supply lines between the meter and the structure run underground and are vulnerable to corrosion, ground movement, and root damage. A main supply line leak shows as high meter usage with all interior fixtures off, sometimes with wet ground or sinkholes along the line path. Acoustic detection locates the failure in the buried line precisely enough to minimize excavation footprint — we mark the surface above the leak so the repair crew opens only the section they need to.

Pool & Irrigation

Pool Line & Irrigation Leak Detection

Pool plumbing — suction and return lines buried between the equipment pad and the shell — develops leaks at fittings or in the pipe body that show as unexplained water loss. We pressure-test the pool plumbing circuit, isolate return and suction lines separately, and use acoustic detection to find which line and where.

24/7 Emergency Leak Detection experts in San Antonio, TX

Insurance Docs

Leak Detection Report for Insurance Claims

Insurance claims for water damage from hidden leaks typically require documentation that the leak was not visible or detectable without specialized equipment. Our detection report includes: pressure test results confirming active water loss, detection method used, thermal imagery or acoustic mapping showing leak location, and technician certification information.

Commercial

Multi-Floor & Large-Property Leak Location

Commercial buildings have complex pipe networks where a supply or drain leak can go undetected through multiple floors before surfacing. We approach commercial detection systematically — zone-by-zone pressure isolation, thermal scan of suspect surfaces, and acoustic confirmation.

📞 Find My Leak — Call +1-844-833-0201

Our Process

Systematic Detection — No Speculative Cutting

Finding a hidden leak isn't a single step — it's a protocol that combines water loss confirmation, zone isolation, and targeted detection in sequence.

Initial Water Loss Confirmation

This step confirms we're looking for a real leak rather than a meter error or normal appliance cycling.

Zone Isolation & Pressure Decay

Zone isolation turns "there's a leak somewhere in the house" into "the leak is on the hot side supply between the water heater and the master bath."

Detection Equipment Deployment

Within the isolated zone, we deploy thermal imaging first — scanning walls, floors, and ceilings for moisture anomalies. Then acoustic equipment confirms the specific pipe location and narrows it to the tightest possible point. Tracer gas is added if acoustic results aren't conclusive.

Written Report & Repair Options

Insurance-formatted reports are available for claims submission at the same standard — no additional cost.

Customer Reviews

What Customers Say About Our Detection Service

★★★★★

High-efficiency home with a slow leak — about 1.5 gallons per hour. The tech used tracer gas after pressure testing confirmed the loss but acoustic detection couldn't localize it clearly. Gas detection found the escape at a micro-fitting under the slab in the utility corridor. Impressive work for a very difficult leak to find.

— C. Thornton, San Antonio

San Antonio, TX · Slab Leak Detection

★★★★★

Ceiling stain in the living room kept coming back despite two drywall patches. Masters Plumbing Service ran the thermal camera and found the wet zone was traveling from a supply line joint 9 feet away, flowing down a horizontal framing member — explaining why the patch kept failing. They marked the actual pipe location, we opened 8 inches of wall there, and the repair held. No more stain.

— B. Osei, San Antonio, TX

San Antonio, TX · In-Wall Leak / Insurance Doc

★★★★★

Commercial building with elevated water costs for six months. Masters Plumbing Service ran zone-by-zone pressure isolation across four floors, narrowed the loss to the third-floor kitchen supply branch, and located the failure with thermal imaging at a concealed valve body in the ceiling. No damage to the finished ceiling.

— T. Anand, San Antonio, TX

San Antonio, TX · Pool Line / Commercial

FAQ

What to Know Before Booking Leak Detection

The most reliable self-check: shut off every fixture and appliance in the house, then watch the water meter for 15 minutes. Any movement — including the small leak indicator dial — means water is escaping somewhere. Secondary indicators: water stains appearing or recurring without an obvious source; mold smell in rooms without a plumbing fixture; soft or discolored flooring; consistent sound of running water inside walls when all fixtures are off.

The repair itself requires physical pipe access — typically a small targeted opening. But that's a completely different proposition from opening large wall sections while searching for an unknown leak location.

For pressurized supply lines in concrete or metal pipe, acoustic detection is typically accurate to within 6–18 inches under ideal conditions — quiet environment, no interference from other water use, metal pipe conducting sound efficiently. Thermal imaging is accurate to the size of the wet zone it reveals, which varies based on how long the leak has been running.

Yes. Our written detection report includes: technician credentials, equipment identification, pressure test methodology and results, detection method description, leak location with reference measurements, and supporting thermal imagery. This is the documentation format most insurance adjusters require to approve a concealed-leak water damage claim.

We don't rush the detection protocol. The acoustic hold time and thermal scan coverage determine accuracy — cutting them short produces uncertain results that cost more to act on.

Yes — for most residential leaks we can repair the failure the same day detection confirms the location. Our service trucks carry repair materials for the most common supply line failures. We quote the repair as a flat-rate job separate from the detection fee, and you decide whether to proceed with us or take the detection report to your own plumber.

Service Area

Masters Plumbing Service Detection Technicians in San Antonio, TX

Masters Plumbing Service provides professional Leak Detection for residential and commercial properties throughout San Antonio and the surrounding San Antonio, TX service area. Detection appointments available most weekdays and Saturdays.

Zip Codes We Serve: 78112 78239 78259 78258 78252 78251 78250 78257 78256 78255 78254 78208 78201 78202 78203 78204 78205 78207 78231 78230 78233 78232 78235 78234 78237 78238 78209 78109 78266 78264 78260 78219 78218 78217 78216 78215 78214 78213 78212 78211 78210 78244 78245 78247 78240 78242 78248 78249 78073 78023 78222 78223 78220 78221 78226 78227 78224 78225 78228 78229 78206 78241 78246 78265 78268 78269 78270 78278 78279 78280 78283 78284 78285 78288 78289 78291 78292 78293 78294 78295 78296 78297 78298 78299 78253 78261 78263 78243 — and surrounding communities.

📞 Book Detection — +1-844-833-0201

Reliable Leak Detection contractor in San Antonio, TX by Masters Plumbing Service

Leak Detection in San Antonio, TX — No Guesswork, No Unnecessary Demo